Wednesday, November 18, 2026
Data from SEC filings, checked daily
My DeskFree
Public filings, plainly told
Rates and returns
Summarize with AIChatGPTClaudePerplexityGoogle AIGrokCopilot
CFA® Level I · Quantitative Methods · Lesson 1 of 11

Rates and returns

Holding-period, arithmetic, geometric, money-weighted and time-weighted returns, and annualizing them.

Written by Sepehr Parsa9 min read

Holding-period return

The simplest return is the holding-period return (HPR): what you earned over the time you held an investment, including income.

HPR = (P1 − P0 + D1) / P0

Buy a stock at $50, receive a $1 dividend, sell at $54: HPR = (54 − 50 + 1) / 50 = 10%.

For several periods, link the returns by compounding: (1 + R1) × (1 + R2) × … − 1.

Arithmetic versus geometric mean

Suppose a stock returns +50% one year and −50% the next.

  • Arithmetic mean: (50% − 50%) / 2 = 0%.
  • Geometric mean: (1.50 × 0.50)^(1/2) − 1 = −13.4%.

Start with $100: after year 1 you have $150, after year 2 you have $75. You lost money, so the geometric mean tells the truth about compound growth. The arithmetic mean is still useful as an estimate of next period’s expected return, but it always equals or exceeds the geometric mean, and the gap grows with volatility.

A third average, the harmonic mean, appears in cost averaging: if you invest the same dollar amount each period, the average price you pay is the harmonic mean of the prices, which is lower than their arithmetic mean.

Time-weighted versus money-weighted return

When money moves in and out of a portfolio, there are two ways to measure return.

Time-weighted return (TWR) breaks the period at every cash flow, computes the HPR of each sub-period and links them geometrically. Because it ignores how much money was invested when, it measures the manager’s skill. GIPS requires it for most composites.

Money-weighted return (MWR) is the internal rate of return of all the cash flows. It reflects the investor’s actual experience, including the effect of adding money before a good or bad period.

Worked example. You invest $100 in a fund. After one year it is worth $120, and you invest another $120. After year 2 the account is worth $260.

  • TWR: year 1 = 120/100 − 1 = 20%. Year 2 = 260/240 − 1 = 8.33%. Annualized TWR = (1.20 × 1.0833)^(1/2) − 1 = 14.0%.
  • MWR: solve −100 − 120/(1 + r) + 260/(1 + r)² = 0, which gives r = 12.0%.

The MWR is lower because more money was invested during the weaker second year. On the BA II Plus: CF0 = −100, C01 = −120, C02 = 260, IRR CPT.

Annualizing returns

To turn a return over a shorter period into an annual one, compound it:

Annualized return = (1 + r_period)^(periods per year) − 1

2% a quarter → 1.02⁴ − 1 = 8.24% a year. For periods longer than a year, use a fractional exponent: 21% over two years → 1.21^(1/2) − 1 = 10%.

Other return measures

  • Gross and net returns. Gross is before management fees; net is after them.
  • Pre-tax and after-tax returns.
  • Real return strips out inflation: (1 + nominal) / (1 + inflation) − 1. A 7% nominal return with 3% inflation is a 3.88% real return. Subtracting (7% − 3% = 4%) is only an approximation.
  • Leveraged return. Borrowing magnifies gains and losses on your own capital: return on equity capital = [r × (equity + debt) − cost of debt × debt] / equity.
  • Continuously compounded return = ln(1 + HPR). A 10% HPR is a 9.53% continuously compounded return. These returns add up across periods, which makes them convenient for multi-period models.

What the exam asks

Expect short calculations: an HPR with a dividend, a geometric mean of three or four returns, a TWR versus MWR comparison, an annualized return, or a conversion between nominal and real. Know which measure suits which purpose: TWR for judging managers, MWR for the investor’s experience, geometric mean for past compound growth.

Check yourself

Tap an answer. You get the explanation straight away.

  1. A stock returns +50% in year 1 and −50% in year 2. Its geometric mean annual return is closest to:

  2. Which return measure is most appropriate for judging a portfolio manager who does not control when clients add or withdraw money?

  3. A bond earns 2% per quarter. Its annualized return is closest to:

Questions people ask

Why is the geometric mean lower than the arithmetic mean?

Because losses and gains compound. A 50% gain followed by a 50% loss leaves you at 75% of where you started, so the compound (geometric) return is negative even though the simple average is zero. The gap grows with volatility.

When should I use time-weighted instead of money-weighted return?

Use time-weighted return to judge a manager, because the manager does not control when clients add or withdraw money. Money-weighted return measures what the investor actually earned, including the effect of their own timing.

Can I annualize a 3-month return by multiplying by 4?

Only as a rough estimate. The correct way compounds it: (1 + quarterly return)^4 − 1. Multiplying ignores interest on interest.

Unlimited practiceGenerate more Quantitative Methods questionsFresh questions with worked solutions every time, in the Level I style.
Progress is saved in this browser.
Next lesson · 2 of 11Time value of moneyPresent and future value, annuities, perpetuities and uneven cash flows, with calculator keystrokes.

CFA Institute does not endorse, promote or warrant the accuracy or quality of WallStPal. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.

Exam format, timing and topic weights are from CFA Institute's Level I, II and III exam pages, checked November 15, 2026. Check CFA Institute for the year you sit. Lessons and practice questions are WallStPal's own and are not CFA Institute material.

Report an error

Tell us what looks wrong on this page. We check every report against the original filing and fix mistakes on our corrections page.

Share this trade
XTelegram
My Desk · free

Sign in to follow

Follow stocks, members of Congress, famous investors and funds, and see what's new each time you come back.